Ericsson AVP 1000 - Option Card Combinations

Options, Licensing and Upgrades
7-4
EN/LZT 790 0023/1 R16A
Marketing Code Name Description Supported in
CE/HWO/CE-HEVC/SFP/F CE-HEVC
CE-HEVC single media processing
module with SFP inputs – Fibre receive
modules
AVP 2000, AVP 3000
7.3 Option Card Combinations
Table 7.2 lists the option cards that are available for the AVP family and the
recommended slots for fitting.
Table 7.2 Option Card Combinations
Option Card AVP 1000 AVP 2000 AVP 3000
CE-a
6 max (Any Slot) 5 max (Any Slot)
CE-a J2K
6 max (Any Slot) 5 max (Any Slot)
CE-x
1 or 2 pair*
1(P)/2(E)
or
3(P)/4(E)
1 or 2 pair*
1(P)/2(E)
or
3(P)/4(E)
CE-xA
1 or 2 pair*
1(P)/2(E)
or
3(P)/4(E)
1 or 2 pair*
1(P)/2(E)
or
3(P)/4(E)
CE-HEVC
4 max (Any Slot) 4 max (Any Slot)
SAT MOD
1 (Slot 6 or 2)
ASI
6 (Any slot) 2 (Any slot) 2 (Any slot)
G.703
1 (Any slot) 1 (Any slot) 1 (Any slot)
Ext SYNC
1 (Any slot) 1 (Any slot)
Notes: CE-x and CE-xA option cards must be correctly fitted in pairs, e.g. 1(P)/2(E)
= Slot 1 (Pre-processor)/Slot 2 (Encoder)
If 2 CE-x or CE-xA modules are fitted in a chassis then no other VCMs can
be fitted.
Thermic restrictions may apply if more than four VCM option cards are fitted
in a unit.
The numbered option card slots available on the AVP are shown in Figure 7.1.
Figure 7.1 Option Card Slot Numbering – 1AC Chassis