Ericsson AVP 1000 - Page 232

Web GUI Control
5-56
EN/LZT 790 0023/1 R16A
Parameter Values Description
Language (Right)
The language of the right channel when in dual mono
(1+1) mode.
Audio Stream Type Main Audio
Clean Effects
Hearing Impaired
Visual Impaired
The audio stream type descriptor for the stream when not
in dual mono (1+1) mode.
Main Audio (00)
Clean Effects (01)
Hearing Impaired (02)
Visual Impaired (03)
Audio Stream Type
(Left)
Main Audio
Clean Effects
Hearing Impaired
Visual Impaired
The audio stream type descriptor for the left channel when
in dual mono (1+1) mode.
Main Audio (00)
Clean Effects (01)
Hearing Impaired (02)
Visual Impaired (03)
Audio Stream Type
(Right)
Main Audio
Clean Effects
Hearing Impaired
Visual Impaired
The audio stream type descriptor for the right channel
when in dual mono (1+1) mode.
Main Audio (00)
Clean Effects (01)
Hearing Impaired (02)
Visual Impaired (03)
User Language 1
A custom three-character language code when User
Defined 1 is set in any of the language fields.
User Language 2
A custom three-character language code when User
Defined 2 is set in any of the language fields.
MPEG Version MPEG1, MPEG2 Configures if MPEG-1 or MPEG-2 to be signaled.
Copyright Off, On Indicates if the material is copyright protected.
Original Off, On Indicates if source is the original or a copy
De-emphasis Off, 50/15us, CCITT J.17
To meet the MPEG-1 Layer 2 encoding algorithm
specification the audio must not have pre-emphasis
applied. If the input signal does have pre-emphasis
applied, a de-emphasis filter must be applied prior to
encoding.
Table 5.19 Dolby Digital Parameters
Parameter Values Description
Bit Rate
56, 64, 80, 96, 112, 128, 160, 192, 224, 256,
320, 384, 448, 512, 576, 640
Bit Rate of the audio stream. The available options depend
on the selected coding mode.
Coding Mode
1/0 (Left – input), 1/0 (Right – input), 1/0 (L+R)/2,
2/0, 3/2L (5.1 Surround)
Specifies what channel configuration to use for encoding.
Metadata Controls
Coding Mode
Off, On
Override default coding mode with coding mode indicated
in decoder program configuration or live metadata (if
present).
Metadata source type Embedded/Decoded Auto Selects where live metadata comes from.
Metadata override
type
None, All, Compression Profile, Dialogue
Normalization, Comp Profile and Dial Norm
Defines which metadata parameters to override.