EasyManua.ls Logo

Ericsson AVP 1000 - Page 282

Ericsson AVP 1000
508 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Web GUI Control
5-106
EN/LZT 790 0023/1 R16A
Parameter Values Description
User Language 1
A custom three-character language code when User
Language 1 is set in the Language field.
User Language 2
A custom three-character language code when User
Language 2 is set in the Language field.
Table 5.81 Pass-thru Parameters
Parameter Values Description
Embedded PCR On, Off
Controls whether PCR is to be embedded in the audio
PES.
Au Information Cont Off, AU Info
Controls the insertion of private data in the adaptation unit
of the audio access units (AU). AU Info is defined in ETSI
TR 101 154. Only AU_PTS is present for audio.
Advanced
Lip Sync Offset -500 to 500 ms
Configures a delay to the audio to improve A/V
synchronization.
Gain -6 to 6dB Sets the gain in dB for the audio stream.
Language The language of the stream.
User Language 1
A custom three-character language code when User
Language 1 is set the Language field.
User Language 2
A custom three-character language code when User
Language 2 is set in the Language field.
Table 5.82 Audio Description Service Parameters
Parameter Values Description
Bit Rate 64 Bit Rate of the audio stream.
Coding Mode 1/0 (Left input) Specifies what channel configuration to use for encoding.
Embedded PCR On, Off
Controls whether PCR is to be embedded in the audio
PES.
Au Information Cont Off, AU Info
Controls the insertion of private data in the adaptation unit
of the audio access units (AU). AU Info is defined in ETSI
TR 101 154. Only AU_PTS is present for audio
Advanced
Lip Sync Offset -500 to 500 ms
Configures a delay to the audio to improve A/V
synchronization.
Gain -6 to 6dB Sets the gain in dB for the audio stream.
Language The language of the stream.
User Language 1
A custom three-character language code when User
Language 1 is set in the Language field.
User Language 2
A custom three-character language code when User
Language 2 is set in the Language field.

Table of Contents

Related product manuals