Ericsson AVP 1000 - Page 44

Getting Started
3-2
EN/LZT 790 0023/1 R16A
3.17.3 Setting Up BISS from the GUI ........................................................... 3-45
3.17.4 Setting Up BISS from the Front Panel ............................................... 3-47
3.17.5 BISS and Stored Configurations ....................................................... 3-48
3.18 How to Splice and Insert Digital Programme Insertion (DPI) .............. 3-49
3.18.1 Splice Point Operation ...................................................................... 3-49
3.18.2 SCTE104 Over IP ............................................................................. 3-50
3.18.3 How to Configure Splicing ................................................................. 3-50
3.19 How to Configure GPI Triggered Splicing .......................................... 3-51
3.19.1 How to Set Up a GPI Card ................................................................ 3-51
3.19.2 How to Set Up a VCM to Use GPI Inputs .......................................... 3-52
3.20 How to Use the Simplified View (Option) ........................................... 3-52
3.20.1 Using the Simplified View .................................................................. 3-52
3.20.1.1 Assumed Workflow ........................................................................... 3-53
3.20.1.2 What to Expect.................................................................................. 3-53
3.20.1.3 Multiple Outputs ................................................................................ 3-54
3.20.1.4 Simplified View Summary ................................................................. 3-56
3.20.1.5 Simplified View Limitations ................................................................ 3-61
3.21 How to Control Temperature/Fan Speed ........................................... 3-63
3.22 How to Get and Apply Additional Licenses ........................................ 3-64
3.22.1 Verifying Which Licenses Are Present in the Unit .............................. 3-64
3.22.2 Ordering Additional Licenses ............................................................ 3-65
3.22.3 Entering License Keys ...................................................................... 3-66
3.23 Alarm Monitoring ............................................................................... 3-67
3.24 Simple Network Management Protocol ............................................. 3-67
3.24.1 Supported Protocols ......................................................................... 3-68
3.24.2 Operation .......................................................................................... 3-68
3.25 How to Configure the AVP Using the Front Panel ............................. 3-69
3.25.1 How to Configure Video Parameters ................................................. 3-69
3.25.2 How to Configure Audio Parameters ................................................. 3-70
3.25.3 How to Set Up a Transport Stream ................................................... 3-70
3.25.4 How to Add More Transport Streams ................................................ 3-73
3.25.5 How to Remove a Component from a Service .................................. 3-73
List of Figures
Figure 3.1 AVP Connections.............................................................................. 3-5
Figure 3.2 Ethernet Control Port Numbering ...................................................... 3-9
Figure 3.3 Ethernet Data Port Numbering ........................................................ 3
-11
Figure 3.4 Setting the Parameters for Satellite Transmission........................... 3-16
Figure 3.5 Service Configuration Web Page – Adding a Transport Stream ...... 3-17
Figure 3.6 Service Configuration Web Page – Adding a Service ..................... 3-18
Figure 3.7 Service Configuration Web Page – Adding a Component ............... 3-19
Figure 3.8 Video Component Output ............................................................... 3-20
Figure 3.9 Setting PCR PID Value ................................................................... 3-21
Figure 3.10 Configuring a Pass-thru Transport Stream ...................................... 3-22
Figure 3.11 Properties Panel view of Pass-thru Transport Stream ..................... 3-22
Figure 3.12 Drag and Drop Service from ASI input to Output Transport
Stream ............................................................................................ 3-23
Figure 3.13 Remux Configuration Wizard .......................................................... 3-24
Figure 3.14 Set-up Procedure for Auto Detect and Restore Saved Config ......... 3-33
Figure 3.15 Input Detection Configuration ......................................................... 3-34
Figure 3.16 4K Video - HD Quadrants ............................................................... 3-35