Ericsson AVP 1000 - Page 478

Alarm Lists
E-22
EN/LZT 790 0023/1 R16A
Alarm Description Port Number Alarm ID Source Severity
Video/Audio Module Error
Video/Audio Module Error. Please
see Video Encoder status for a more
detailed description of the error.
0 010C0003
CE-a J2K
Module
critical
Power On Self Test Failure
At least one start-up test has failed.
Problems may be experienced with
the normal operation of the unit.
0 010C0004
CE-a J2K
Module
critical
Video Processor Warning
A minor error occurred on the Video
processor but services are not
affected. See log for more details
0 010C0005
CE-a J2K
Module
minor
Invalid Configuration
An invalid configuration has been
applied. Check Video Standard and
Profile selection.
0 010C0006
CE-a J2K
Module
minor
Option Card Build Version
Mismatch
The software on this option card is
not an officially released version.
0 010C0007
CE-a J2K
Module
minor
Video Processor Error
An error has been detected on the
Video Processor. This will affect
services and the error is being
recovered. See log for more details.
0 010C0008
CE-a J2K
Module
critical
Internal Packetizer Error
A packetizer error has occurred on
at least one stream.
1 010C0009
CE-a J2K
Module
warning
Video Processor Failure
An unrecoverable failure has
occured on the Video Processor.
The services are affected and
intervention is required. See log for
more details
1 010C000A
CE-a J2K
Module
critical
Video Processor Boot Failure
At least one video processor has not
booted
1 010C0FE0
CE-a J2K
Module
critical
Video Processor Alive Count
Failure
At least one video processor has not
incremented its alive count
1 010C0FE1
CE-a J2K
Module
critical
Video 1 Input Lock
No valid video found on video input.
Please check source connection.
1 010C4000 CE-a J2K critical
Max ANC Data Rate Exceeded
The maximum bit-rate of the generic
ANC data output is exceeded. A
lower input ANC data rate is
required.
1 010C4011 VBI warning
Video 1 Encode Invalid
Configuration
An invalid configuration has been
applied to Main Channel. Check
Video Standard and Profile
selection.
0 010C4018 CE-a J2K minor
Audio Module Error
The audio module reported an
unexpected status value.
0 010C3FE0
Audio
Module 1
minor
Audio Module CPU loading
The audio module CPU load is too
high to support the current audio
configuration.
0 010C3FE1
Audio
Module 1
major
Audio DSP Failed to Boot The audio DSP has failed to boot 0 010C3FE2
Audio
Module 1
major
Audio 1 Input lock
No valid audio detected on selected
input. Please check source
connection.
0 010C2000 Audio 1 major
Audio 1 TS input error
Incoming transport stream error.
Please check source TS.
0 010C2001 Audio 1 major