Preliminary Pages
Issue Date
Software
Version
Comments
G Aug 2014 9.10.x Updated for software version 9.10.x.
Roll-off factors of 5, 10 and 15 percent supported
for DVB-S2.
H Dec 2014 9.11.x Updated for software version 9.11.x.
Adds support for DVB RF Carrier ID Voyager
II/AVP3000.
Adds option to include EIT and TDT tables in output
streams for ETR290 Level 3 compliance.
J May 2015 9.13.x Updated for software version 9.12.x and 9.13.x.
Adds AVP 1000 (1RU).
Adds support for DVB-S2X for
Voyager II/AVP3000.
K Aug 2015 9.15.x Updated for software version 9.15.
Support for Voyager Dashboard has been
superseded by the Simplified View, which extends
supported outputs to IP and ASI and is available for
AVP 2000 as well as AVP 3000.
Note: 9.15.x is the last software release to support
the Contribution Encoder and Voyager II products.
L Aug 2016 9.22.x Updated for software version 9.22.
Adds information for AVP1000 product.
Adds details of H.264 fixed latency buffer mode for
CE-x option cards.
BISS encryption per component within a service.
Adds details for CE-HEVC option module,
introduced in this release.
M Jan 2017 9.24.x Updated for software version 9.24.
Adds supports for support for closed captions and
timecode for CE-HEVC.
Adds support for loading a stored configuration
when a change of SDI input is detected to update
video and VBI configuration.
N Mar 2017 9.25.x Updated for software version 9.25.
Adds support for remote logging, CE-x and
HDR/WSS signaling for CE-HEVC.
S Apr 2017 9.26.x Updated for software version 9.26.
Adds support for SCTE-104 to SCTE-35 message
translation on HEVC Card, In-band Control via Data
Output ports, Generic ANC and Teletext on HEVC
Card.