Servicing Hardware
Caution!
Risk of severe damage to your eyes. Do not stare into the connector or directly
view the laser beam emerging from the connector. All versions of the optical
cards are Class 1 products, which use lasers to convert electrical signals to
optical signals that can damage your eyes. Keep the connectors covered until
you are ready to connect the fiber-optic cables.
Caution!
Risk of data loss. Install only the transceivers approved by Ericsson. You can
corrupt the system if you attempt to install transceivers have not been tested
with supported line cards.
Stop!
Risk of ESD damage. Always use an ESD wrist or ankle strap when handling
a transceiver. Transceivers contain electrostatic sensitive devices. Avoid
touching its connector pins.
Figure 27 GBIC Transceiver
95
27/153 30-CRA 119 1170/1 Uen A | 2010-04-09
To Next Page
Loading...
