SmartEdge 600 Router Hardware Guide
Figure 28 SFP Transceiver
Figure 29 XFP Transceiver
To remove a transceiver of any type:
1. Shut down all activity on the port with the transceiver you want to
replace. See protocol-specific configuration documents located at
h
ttps://ebusiness.ericsson.net.
2. Put on an antistatic wrist strap, and attach it to an appropriate grounded
surface. Do not attach the wrist strap to a painted surface; an ESD
convenience jack is located on the front of the fan tray.
Caution!
Risk of damage to fiber-optic cables. Never step on a cable or twist it when
connecting it to or disconnecting it from an line card.
96 27/153 30-CRA 119 1170/1 Uen A | 2010-04-09
To Next Page
Loading...
