SmartEdge Storage Engine
Figure 55 LEDs on SSE Cards
Table 157 Equipment LEDs on the SSE Card
Label Activity Color Description
On Red A failure exists on the card.
(1)
FAIL
Off None No failure exists on the card.
On Green This card is in service.ACTIVE
Off None This card is on standby (the STDBY LED is on) or has failed (the FAIL LED is
on).
On Yellow This card is on standby.STDBY
Off None This card is in service (the ACTIVE LED is on) or has failed (the FAIL LED is
on).
(1) A failure can be total, partial, or forced. Failure on any part of the card, including failure of any of its ports, results
in the FAIL LED being lit.
Table 158 Facility LEDs for the HDD on the SSE Card
Label Color Activity Description
Green On The HDD is powered on.
Green Blinking The HDD is in active mode.
None Off The HDD is powered off.
Yellow On The HDD can be removed for servicing.
Yellow Blinking The HDD data is being synchronized to another HDD.
Disk 1 or Disk 2
None Off The HDD is in normal operation mode.
16527/153 30-CRA 119 1170/1 Uen A | 2010-04-09
To Next Page
Loading...
