SmartEdge 600 Router Hardware Guide
Figure 14 Installing an SFP Transceiver
Figure 15 Installing an XFP Transceiver
Gigabit Ethernet ports require a gigabit interface converter (GBIC), a small
form-factor pluggable (SFP), or a 10-Gbps SFP (XFP) transceiver in each port;
the port on an OC-192c/STM-64c card also requires an XFP transceiver.
Table 26 Transceiver Types for Line Cards
Line Card Transceiver
(1)
Supported Versions
Gigabit Ethernet (4-port) GBIC SX, LX, LX70, TX
Advanced Gigabit Ethernet (4-port) GBIC SX, LX, LX70, TX
ATM OC-3c/STM-1c (4-port) GBIC IR
Enhanced ATM OC-12c/STM-4c (1-port) GBIC IR
ATM OC-3c/STM-1c (8-port) SFP SR-0, IR-1
POS OC-3c/STM-1c (8-port) SFP SR-0, SR-1, IR-1
POS OC-12c/STM-4c (4-port) SFP SR-1, IR-1
POS OC-48c/STM-16c (4-port) SFP SR-1, IR-1, LR-2
Gigabit Ethernet 3 (4-port) SFP SX, LX, TX, ZX, CWDMnnnn, DWDMnn
Gigabit Ethernet 1020 (10-port) SFP SX, LX, TX, ZX, CWDMnnnn, DWDMnn
36 27/153 30-CRA 119 1170/1 Uen A | 2010-04-09
To Next Page
Loading...
