Hardware Control and Troubleshooting
3.13.1 Initiate ODD Session
Table 69 Parameters for an ODD Session
Parameter Description
card card-type slot
Line card in the specified slot to be tested; see the “Card Types and Slots for
the card Command” table for argument values.
standby
Tests the standby controller card.
level level
Level at which the test is to be initiated. The levels are 1 to 4.
loop loop-num
Number of times to repeat the diagnostic test.
Table 70 Card Types and Slots for the card Command
Type of Line Card and Description card-type Keyword slot Argument Range
ATM OC-3c/STM-1c (8-port)
atm-oc3e-8-port
1to6and9to14
ATM OC-3c/STM-1c IR (4-port)
atm-oc3-4-port
1to6and9to14
Enhanced ATM OC-12c/STM-4c IR (1-port)
atm-oc12e-1-port
1to6and9to14
POS OC-3c/STM-1c (8-port, any SFP version)
(1)
oc3e-8-port
1to6and9to14
POS OC-12c/STM-4c (4-port, any SFP version)
oc12e-4-port
1to6and9to14
POS OC-48c/STM-16c (4-port, any SFP version)
oc48e-4-port
1to6and9to14
OC-192c/STM-64c (1-port, any XFP version)
oc192-1-port
1to6and9to14
10/100 Ethernet (12-port)
ether-12-port
1to6and9to14
Fast Ethernet–Gigabit Ethernet (60-port FE, 2-port-GE)
fege-60-2-port
1to6and9to14
Gigabit Ethernet (4-port, first and second versions)
gigaether-4-port
1to6and9to14
Gigabit Ethernet 3 (4-port)
ge3-4-port
1to6and9to14
Gigabit Ethernet 1020 (10-port)
ge-10-port
1to6and9to14
Gigabit Ethernet 1020 (20-port)
(2)
ge-20-port
1to6and9to14
Gigabit Ethernet (5-port)
ge-5-port
1to6and9to14
Gigabit Ethernet (20-port)
ge4-20-port
1to6and9to14
10 Gigabit Ethernet (1-port)
10ge-1-port
1to6and9to14
10 Gigabit Ethernet (4-port)
10ge-4-port
1to6and9to14
Advanced Services Engine
ase
1to6and9to14
SmartEdge Storage Engine
sse
1to6and9to14
(1) Use part number SFP-OC3-SM-IR when ordering the SFP transceivers with POS OC-3 SR-1 or POS OC-3
IR-1 functionality.
(2) The 20-port GE1020 card requires two adjacent slots.
To initiate an ODD session:
1. If you are testing a line card, change its state to ODD; otherwise, proceed
to step 2.
2. To prepare a line card for an ODD session, perform the tasks listed in Table
71; Table 70 lists values for the
card-type and slot arguments.
83
27/153 30-CRA 119 1170/1 Uen A | 2010-04-09
To Next Page
Loading...
