ESAB PEK A2 - Weld Data Memory Menu

− 15 −
bi24d1ea
In the measurement display one can also see the set values if the soft key SET
VALUES is activated. For activating see chapter ”Setting soft keys“ 8.2.3 .
300 cm/min
Set wire feed speed
20.0 Volt
Set arc voltage
30 cm/min
Set travel speed
SAW: CA
300 cm/min
V 20.0 Volt
30 cm/min
|
|
|
|
|
|
NONE NONE
SET
VALUES NONE
2ND
FUNCT
2.1.5 Weld data memory menu
Main menu 
In the WELD DATA
MEMORY menu you
can store, recall, delete
and copy various set
weld data. The weld
data sets can be stored
in 255 different memory
positions.
WELD DATA MEMORY
1 −
2 −
3 −
4 −
5 −
6 −
7 −
STORE
2ND
FUNCT QUIT
For further information, see the chapter 7 “Memory management”.
GB