Essilor Pro-E 700 edger User Manual

Press .
The GMD module moves to facilitate the operation.
Press to receive more image information about the tool assembly/dismantling procedure.
Press to cancel the action.
Block the axle with the blocking key.
Put the adjustable wrench on the chuck
The adjustable wrench must never be in contact with the mill bit.
Loosen the chuck with the adjustable wrench (two notches towards yourself).
>
1
2
3
4
USER MANUAL> V. MAINTENANCE & SERVICING
163
Pro-E 600_Pro-E 700 > v1 -10.18

Essilor Pro-E 700 edger Specifications

General

Brand	Essilor
Model	Pro-E 700 edger
Category	Laboratory Equipment
Language	English