General Information 11
1.3 About This Manual
This manual describes the startup and technical data of the ES511.1 module.
1.3.1 Structure
This manual consists of eight chapters and an index.
• Chapter 1: “Introduction”
The “Introduction” (this chapter) provides you with information on the
basic safety instructions, returning the product and recycling, how to
use this manual, the delivery scope and other details.
• Chapter 2: “Hardware Description”
The “Hardware Description” chapter provides you with an overview of
the ES511.1 with information on the housing, serial number, ports and
LEDs.
• Chapter 3: “Functional Description”
The “Functional Description” chapter describes the block diagram,
power supply, Ethernet switch, module network, time synchronization
and the firmware update.
• Chapter 4: “Getting Started”
The “Getting Started” chapter includes application examples and notes
on the wiring of the ES511.1.
• Chapter 5: “Technical Data”
The “Technical Data” chapter contains a summary of all technical data
and the pin assignments of the ES511.1 module.
• Chapter 6: “Cables and Accessories”
The “Cables and Accessories” chapter contains an overview of the
available cables and accessories.
• Chapter 7: “Ordering Information”
The “Ordering Information” chapter contains the ordering information
on the available cables and accessories.
• Chapter 8: Appendix A: "Troubleshooting Problems"
This chapter gives some information of what you can do when prob-
lems arise with the ES511.1 and problems that are not specific to an
individual software or hardware product.
The final chapter, “ETAS Contacts”, gives you information on ETAS’ interna-
tional sales and service locations.
Manual.book Seite 11 Montag, 13. Juli 2009 6:24 18
To Next Page
