ETAS ES511.1 - Electrical Data; Interface HOST

Technical Data 39
5.3 Electrical Data
5.3.1 Interface „HOST“
CAN CAN Monitoring MC V6.2.1 - -
CAN Output MC V6.2.1 - -
CCP MC V6.2.1 - -
KWP2000 MC V6.2.1 - -
UDS MC V6.2.1 - -
XCP MC V6.2.1 - -
LIN LIN Monitoring MC V6.2.1 - -
1)
: MC: Measurement and Calibration
Connection 10/100Base-T Ethernet; Full Duplex
PC Card, 32 bit
Protocol Ethernet Switching (Layer 2), IEEE802.3
Note
To ensure successful initialization of the network card of your PC, refer to
chapter 5.2.2 on page 38.
Support in
Application Software
Inter-
face
Application Classifi-
cation
1)
INCA INTECRIO ASCET-RP
Manual.book Seite 39 Montag, 13. Juli 2009 6:24 18