General Information 7
1 General Information
The introductory chapter provides you with information on the basic safety
instructions, returning the product and recycling, how to use this manual, the
delivery scope and other details.
1.1 Basic Safety Instructions
Please adhere to the following safety instructions to avoid injury to yourself
and others as well as damage to the device.
1.1.1 Product Liability Disclaimer (ETAS Disclaimer)
This ETAS product enables a user to influence or control the electronic systems
in a vehicle or in a testbench. THE PRODUCT IS SPECIFICALLY DESIGNED FOR
THE EXCLUSIVE USE BY PERSONNEL WHO HAVE SPECIAL EXPERIENCE AND
TRAINING.
Improper use or unskilled application of this ETAS product may alter the vehicle
performance or system performance in a manner that results in death, serious
personal injury or property damage.
• Do not use this ETAS product if you do not have the proper
experience and training.
• Also, if a product issue develops, ETAS will prepare a Known
Issue Report (KIR) and post it on the internet. The report
includes information regarding the technical impact and status
of the solution. Therefore you must check the KIR applicable to
this ETAS product version and follow the relevant instructions
prior to operation of the product.
The Known Issue Report (KIR) can be found here:
http://www.etasgroup.com/kir
• Any data acquired through the use of this ETAS product must be
verified for reliability, quality and accuracy prior to use or distri-
bution. This applies both to calibration data and to measure-
ments that are used as a basis for calibration work.
WARNING!
The use and application of this product can be dangerous. It is
critical that you carefully read and follow the instructions and
warnings below and in the associated user manuals.
Manual.book Seite 7 Montag, 13. Juli 2009 6:24 18
To Next Page
Loading...
