ETAS ES511.1 - Correct Use; Labeling of Safety Instructions; Demands Made Re the Technical State of the Product

General Information 9
1.1.2 Correct Use
ETAS GmbH cannot be made liable for damage which is caused by incorrect
use and not adhering to the safety instructions.
1.1.3 Labeling of Safety Instructions
The safety instructions contained in this manual are shown with the standard
danger symbol shown below:
The following safety instructions are used. They provide extremely important
information. Please read this information carefully.
1.1.4 Demands made re the Technical State of the Product
The following requirements are made to ensure safe operation of the module:
• Ensure you observe the notes on environmental conditions (see section
5.1.2 on page 37).
• Ensure you adhere to the port and setting values (see section 5.3.1
on page 39 and section 5.3.2 on page 40).
WARNING!
Indicates a possible medium-risk danger which could lead to seri-
ous or even fatal injuries if not avoided.
CAUTION!
Indicates a low-risk danger which could result in minor or less seri-
ous injury or damage if not avoided.
CAUTION!
The module can be damaged or destroyed!
Do not open or change the module!
Work on the module must only be carried out by specialist, quali-
fied personnel.
Manual.book Seite 9 Montag, 13. Juli 2009 6:24 18