evertz EQT-3232-H User Manual

EQT Router User Manual
Page 6 Revision 1.9.1
SMPTE 272M: The SMPTE standard for embedding audio in serial digital standard definition
(SMPTE 259M-C) video signals.
SMPTE 274M: The SMPTE standard for bit parallel digital interface for high definition component
video signals with an active picture of 1080 lines x 1920 pixels.
SMPTE 276M: The SMPTE standard for transmission of AES/EBU Digital Audio Signals Over Coaxial
Cable.
SMPTE 292M: The SMPTE standard for high definition serial digital component interfaces.
SMPTE 296M: The SMPTE standard for bit parallel digital interface for high definition component
video signals with an active picture of 720 lines x 1280 pixels.
SMPTE 299M: The SMPTE standard for embedding audio in serial digital high definition
(SMPTE 292M) video signals.
TRS: Timing reference signals used in composite digital systems. (It is four words long).
TRS-ID: Abbreviation for "Timing Reference Signal Identification". A reference signal used to
maintain timing in composite digital systems. (It is four words long.)

evertz EQT-3232-H Specifications

General

Brand	evertz
Model	EQT-3232-H
Category	Network Router
Language	English