EQT Router User Manual
Revision 1.9.1 Page 21
3. TECHNICAL DESCRIPTION
3.1. SPECIFICATIONS
3.1.1. Configuration
Inputs: Fixed at 32 or 16
Outputs: Fixed at 32 or 24 or 16 or 8 or 4
(-CS versions, 2 or 4 clean/quiet, 6 or 20 auxiliary)
Redundant Protection: Redundant Power Supply (Optional)
3.1.2. Video Inputs
Standards: SMPTE 259M, SMPTE 292M, SMPTE 310M, SMPTE 424M, ASI
Signal Level: 800mV p-p
Impedance: 75Ω terminating
Return Loss: >15db typical (5-1485 MHz)
Cable Equalization: Belden 1694A 200m @ 270MHz, 150m @1.5Gb/s, 100M @ 3Gb/s
Connectors: BNC per IEC 61169-8 Annex A
3.1.3. Video Outputs
Signals Supported: SMPTE 259M, SMPTE 292M, SMPTE 310M, SMPTE 424M, ASI
Reclocking: Configurable
Non-Reclocking: Configurable
Signal Level: 800mV p-p ± 10%
Impedance: 75Ω terminating
Return Loss: >15 db typical (5-1485 MHz)
DC Offset: 0 ± 0.5V
Output Jitter: 0.2 UI
Connectors: BNC per IEC 61169-8 Annex A
3.1.4. Fiber Inputs (-F Fiber version)
Number of Fiber Inputs: 2
Reclocked Data Rate: 270Mb/s, 1.485Gb/s, 2.970Gb/s
Receive Sensitivity -20dBm
Receive Wavelength 1260 to 1620nm
Connectors: LC
Fiber Type: Single Mode
To Next Page
Loading...
Need help?
General
