DMTA-20102-01EN, Rev. 7, October 2022
Chapter 352
3.5 Software
The OmniScan X3 flaw detector operates using OmniScan MXU software, which may
periodically be updated. For details, refer to the OmniScan MXU Software User’s
Manual. You can download the latest MXU software version at EvidentScientific.com.
3.6 Global Positioning System (GPS)
The OmniScan X3 flaw detector incorporates a GPS, which provides the geographic
coordinates (location) of the instrument. The GPS is automatically activated when the
OmniScan X3 is turned on. After the OmniScan X3 is turned on, there may be a delay
of up to two minutes before it is able to obtain the coordinates.
GPS functionality is not available in all countries. Contact your local Evident
representative for details.
To Next Page
Loading...