DMTA-20102-01EN, Rev. 7, October 2022
Important Information — Please Read Before Use 9
Important Information — Please Read Before Use
Intended Use
The OmniScan X3 is designed to perform nondestructive inspections on industrial
and commercial materials.
Do not use the OmniScan X3 for any purpose other than its intended use. It must
never be used to inspect or examine human or animal body parts.
Instruction Manual
This instruction manual contains essential information on how to use this product
safely and effectively. Before using this product, thoroughly review this instruction
manual. Use the product as instructed. Keep this instruction manual in a safe,
accessible location.
Some of the details of components illustrated in this manual may differ from the
components installed on your device. However, the operating principles remain the
same.
To Next Page
Loading...