Excelltel MS Series - 3.3 Enable;Disable C.O. Lines; 3.4 Day;night mode & weekend mode setting

MS Series PABX User Manual
9
3.3 Enable/Disable C.O. Lines
You must use these command according to the actual CO line connected
before use the PBX. If you don’t enable any C.O. line, system will define no
C.O. line connected and will not auto detect C.O. line!!!
3.3.1 Enable All C.O. Lines
Format: 0600#
Description: Enable all C.O. lines
On default setting: system is in CO line disabled status.
3.3.2 DisableAll C.O.Lines
Format: 0610#
Description: Disable all C.O. lines
3.3.3 Enable No. M C.O. Line
Format: 060M#
Explanation: M: C.O. Line port No. M = 1 - 3
Description: Enable the No.M C.O. line
Example: You have a 308 PBX, you want to use C.O. line 1 and C.O. line
2, but the line 3 is not occupied.
3.3.4 DisableNo.M C.O. Line
Format: 061M#
Explanation: M: C.O. Line port No. M = 1 - 3
Description: Disable the No.M C.O. line
3.4 Day/night mode & weekend mode setting
3.4.1 System Date/Timesetting (Optional forhigherversion MS+ seriesonly)
Format: 01YYMMDD# Set year/month/date of system
Explanation: ●YY: year, 00-99 ●MM: month, 01-12 ●DD: date, 01-31
Format: 02 HHTT# Set Hour/Minute of system