MS Series PABX User Manual
25
3.21 Ext. Group Setting
3.21.1 Set Ext. Group Number
All the extension can be set in 2 groups.
Format: 9 9 0 abcd #
Description: set the first group number and enable it.
Format: 9 9 1 abcd #
Description: set the second group number and enable it.
extension number
● Ext group number should be different with the other extension
number
3.21.2 Add membersin Ext.group
Format: 3 9 0 #
Description: to delete all extension members in the first group.
Format: 3 9 0 N
1
N
2
… N
R
* N
S
.. N
T
#
Explanation: N
1,
N
2,
N
R,
N
S,
N
T:
the Ext. port No(N= 1-8 means ext 601-608)
Description: In the first group join the Ext.N
1 ,
Ext.N
2...
Ext.N
T,
and from Ext.
N
R
to Ext.N
S
is in sequence member.
Example: Add Ext.601, Ext.602, Ext.605 …to Ext.608(include Ext.608) in
sequence as members of the first group, then input 390 1 2 5 * 8 #.
After by this setting, when you dial the group number, Ext.601, Ext.602,
Ext.605 ...Ext.608 will ringing at the same time.
Format: 3 9 1 #
Description: to delete all extension members in the second group.
Format: 3 9 1 N
1
N
2
… N
R
* N
S
.. N
T
#
Description: In the second group add Ext.N
1 ,
Ext.N
2...
Ext.N
T,
and from
Ext.N
R
to Ext.N
S
is in sequence member.
3.21.3 Set the Ext.Group workmode
Format: 1 6 8 #
Description: Set the Ext. group in meeting mode.
Explanation: when Ext. group is in meeting mode; If some extension call
this group, all the members in this group will ring simultaneously, each
extension can pick up the handset to talk with the caller, while the other
extension keep ringing. This is also a conference function.
Instruction: 1 6 9 #
Description: Set the Ext group in normal call mode.
Explanation: when Ext group is in normal call mode;If call this group, all
the members in this group will ring simultaneously, each extension can pick
up the handset to talk with the caller, if any extension answer the call, the
other extension will stop ringing.
◆ Default setting is normal call mode.
To Next Page
Loading...
