Excelltel MS Series - III.1 Programming Setting; III.2 Enable;Disable Prefix Number Add Dialing Function; III.3 Prefix Number Setting; III.4 Prefix Number Dialing

MS Series PABX User Manual
48
III.1 Programming setting
The following format should be performed in programming status:
III.2 Enable/Disable prefix number add Dialing
function
Format: 8400# disable prefix add dialing function for all C.O. line
84N# disable prefix add dialing function for No. N Ext
8500# enable prefix add dialing function for all extension.
85N# enable prefix add dialing function for No. N Ext
8803# all outgoing call use added prefix number
8804# enable special C.O. line (trunk line) prefix add dialing
function, only add prefix number when call special trunk line.
8800# cancel 8803# and 8804# setting functions.
III.3 Prefix Number Setting
Format: 83ABCD + off-hook
Description: ABCD --- prefix number, the longest number is 60 digits,
0…9, # is the dialed number, * mean pause, one * mean pause 1s, can use
more * to add waiting time.
Example: If prefix number is 17909, input 8317909+off-hook
III.4 Prefix Number Dialing
◆ As per normal dialing mode(direct dialing-out mode/indirect dialing-out mode
both ok)to dial the number, system will auto add prefix number.
Appendix IV Abbreviated-dialing
(Memory dialing)
This function allow Extension to make an outgoing call with only
dialing two digits series No.(one serial number indicate a string of real
phone number).
IV.1 Programming setting
The following format should be performed in programming status:
Format : 46 # to clear all Abbreviated-Dialing Number.
46K# to clear the Abbreviated-Dialing Number of Group K
46KABCD…# to set the Abbreviated-Dialing Number of Group K
Explanation:
◆ K is the group number, K =01-96. You can set at most 96 groups.