MS Series PABX User Manual
16
āThis function only for C.O. line Incoming call.
3.8.4 Set C.O.lines ringing mode
Format: 380# Set all the C.O line ring is in normal mode(operator
ringing extension will ring simultaneously,this is
default setting)
381# Set all the C.O line ring is in round robin mode
(operator ringing extension will ring one by one)
499TT# Set the ringing time in round robin mode
(TT=01-99, unit is second, default TT=10, that is
10s)
Description: When C.O line is in round robin ringing mode, the incoming
call will ring operator ringing extension one by one. For example, the
default operator ringing extension is 601 and 602, the call will ring 601 at
first, after 10s, will ring 602.
3.8.5 Ringingmode when all the ringing extensions is busy
Format: 1 8 8 0 #
Description: When C.O.line incoming call arrives, and all the ringing
extensions assigned to C.O. line is busy, system will send prompt beep
tone to the ringing extensions every five seconds. this is default setting.
Format: 1 8 8 1 #
Description: When C.O.line incoming call arrives, and all the ringing
extensions assigned to C.O. line is busy, instead of sending prompt beep
tone, the system will search the first available extension from Ext. 601 to
Ext. 608 in sequence then ring it.
Format: 1 8 8 2#
Disable sending prompt beep tone when ringing extension is busy
Format: 1 8 8 3#
Enable sending prompt beep tone when ringing extension is busy
3.9 C.O.Line Call Process in Auto-attendant Mode
3.9.1 OGM busy Process in Auto-attendant work Mode
Format: 1 5 4 0 #
Description: when CO line incoming call arrives and OGM is busy, then
the call is in waiting status(no extensions ring),this is default setting.
Format: 1 5 4 1#
Description:When multiple CO line incoming call arrives, as this system
only has one OGM, you can set some call is in waiting status, some call
ring operator ringing extension(refer 3.8.2 & 3.8.3).
3.9.2 No dialing Process in Auto-attendant work Mode
Format: 1 6 0 #
To Next Page
Loading...
