Excelltel MS Series - 3.6 OGM setting (Outgoing Message)

MS Series PABX User Manual
12
Description: Set No.M C.O. line in Operator work mode.
Example: Set C.O. line 1 and 3 in operator mode, other C.O. line in
Auto-attendant mode.
3.5.5 Enable/Disable fastdialing in OGM mode
Format: 1546# Disable fast dialing function, this is default setting
1547# Enable fast dialing function.
1548# Disable fast dialing Ext group function
1549# Enable fast dialing Ext group function
Description: when this function is enabled, in auto attendant mode, caller
dial 1 to ext. 601, dial 2 to ext. 602, dial 3 to ext. 603…… dial 8 to 608, .
dial 0 to operator ext.
3.5.6 CRBT(Directlyring while playOGM Process in Auto-attendantMode)
NOTE: ◆This function allow the outside caller hear OGM while the
system directly ring extension without dialing any extension numbers.
◆ You should set the C.O.line in Auto-attendant mode at first.
◆ In this mode we suggest you record the OGM in one section.
Format: 1 67 # this is default setting
Description: disable directly ring extension while playing OGM in
auto-attendant mode.
Format: 1 6 7 0 #
Description: enable directly ring extension while playing OGM in
auto-attendant mode,and the ringing extensions is the first & the second
operator.
Format: 1 671# to ring the first Ext. Group
Format: 1 672# to ring the second Ext. Group
Description: Enable directly ring extensions while playing OGM in
auto-attendant mode,and the ringing extensions is the Ext. Groups.
Format: 1 6 7 6 #
Description: Enable directly ring extension while playing OGM in
auto-attendant mode, The system will call the operator mode ringing
Extension.
3.6 OGM setting (Outgoing Message)
This system has one OGM with 20 seconds(default) recordable time.
3.6.1 Set OGM section mode
The system use maximum four section of OGM messages, and can