MS Series PABX User Manual
41
Transfer to operator mode ringing
extension
System option for
transfer to a no answer
Ext
Dialing Extension Busy
process in
auto-attendant
send prompt tone to the extension
transferred to the operator mode
ringing extension
No Answer process in
auto-attendant
Tr a n s f e r t o op e r a t o r
transferred to the operator mode
ringing extension
System CRBT in
auto-attendant
Call the operator directly
call the operator mode Ringing
Extensions
Power Failure
Conservation
No t c o n s e r v a t i o n
Set Exts groups in the meeting work mode
Set Exts groups in the normal work mode
Disable add digits for intercom CID
Add KK in intercom CID number
No answer call forwarding time
Setting duration of swtich signal（for 208）
C. O line reservation time
Direct-Dialing-Out mode for Ext.N
Indirect-Dialing-Out mode for Ext.N
Direct-Dialing-Out mode for all the Exts.
Indirect-Dialing-Out mode for all the Exts
Dial all member in the first Exts. Group
Add member in the first Exts.Group
Del all member in the second Exts. Group
Add member in the second Exts.Group
Enable Exts N ring When No.M C.O line calling( in day mode )
Disable Exts N ring When No.M C.O line calling(in day
mode)
Disable all Exts ring When No.M C.O line calling( in day
mode)
Enable Exts N ring When No.M C.O line calling(in night mode)
Disable Exts N ring When No.M C.O line calling( in night
mode)
Disable all Exts ring When No.M C.O line calling(in night
mode)
Assign dialing-out class L for certain Ext. N
Assign dialing-out class L for all Exts
Restrict the Certain Numbers from item A
To Next Page
Loading...
