Excelltel MS Series - II.2 Programming setting

MS Series PABX User Manual
46
Format: 0720#
Description: Enable manual LCR function
Format: 0721#
Description: Disable manual LCR function
Format: 0730#
Description: System will access normal trunk line if special trunk line is
busy.
Format: 0731#
Description: Restrict system access normal trunk line if special trunk line
is busy.
Format: 0732#
Description: System will access special trunk line if normal trunk line is
busy.
Format: 0733#
Description: Restrict system access special trunk line if normal trunk line
is busy.
Format: 0740#
Description: allow normal trunk line available for outgoing & incoming.
Format: 0741#
Description: Don’t allow normal trunk line available for outgoing.
Format: 0750#
Description: allow special trunk line available for outgoing & incoming
Format: 0751#
Description: Don’t allow special trunk line available for outgoing.
Set trunk line in Normal trunk line / Special trunk line
Format: 0760#
Description: Set all trunk line as Normal trunk line
Format: 076M#
Description: Set NO.M trunk line as Normal trunk line (M=1-3)
Format: 0770#
Description: Set all trunk lines as the special trunk line
Format: 077M#
Description: Set NO.M trunk line as special trunk line(M=1-3).
Set outgoing access-code for Special trunk line
Format: 078K#
Description: In Manual LCR mode, set outgoing code K to access special
trunk line.
● K=1, 2…..8 (K can’t be outgoing code 9 or 0)
●K can’t be the same as the first digit of extension number
Set routing number for special trunk line (In Auto LCR mode)
Format: 08#
Description:Clear all routing number for special trunk line.We recommend
user to use this format before set auto LCR function.
Format: 08QABCD#