Troubleshooting
98 FIP-500
Restoring Your Unit to Normal Operation
7. Read the instructions, and then confirm the operation by tapping
FACTORY RESET. Wait for the operation to complete.
8. A message will inform you when the operation is complete. Tap
RESTART.
9. Once your unit has restarted, read and accept the EXFO license
agreement, set the date and time, and read safety instructions as you
did when you first received your unit (see Configuring Your Unit at First
Startup on page 19).
10. If desired, perform a software upgrade to ensure that your unit is up to
date (see Upgrading Software on page 91).
You are now ready to work with your unit.
CAUTION
DO NOT TURN OFF your unit while the recovery operation is
underway. Doing so may damage your unit. Damaged units will
need to be sent back to EXFO for repair.
To Next Page
Loading...
