Maintenance
FTB-500 263
Recharging the Batteries
To recharge the batteries:
Connect the unit to a power outlet using the AC adapter/charger (four-slot
units) or a standard power cord (eight-slot units). The charge cycle will
start and end automatically.
IMPORTANT
Remove the batteries if the unit will not be used for more than
two weeks.
If you need to store the batteries for an extended period of
time, place them in a cool dry place, and ensure that they are
charged at around 50 % of their capacity. Every three months
during the storage period, verify the battery level. Recharge the
batteries when necessary, so that their charge level remains
around 50 % of the total capacity. This will ensure that you get
the optimum performance out of the batteries.
Li-Ion batteries that are not used for a long period of time (over
three months) will not be damaged, but might need to be
recalibrated.
To Next Page
Loading...
