Safety Information
20 FTB-500
Electrical Safety Information
Electrical Safety Information
The four-slot model uses an external AC/DC adapter connected to an
international safety standard three-wire power cable.
The eight-slot model uses an international safety standard three-wire
power cable. This cable serves as a ground when connected to an
appropriate AC power outlet.
Note: If you need to ensure that the unit is completely turned off, disconnect the
power cable and remove the batteries.
WARNING
Insert the power cable plug into a power outlet with a
protective ground contact. Do not use an extension cord
without a protective conductor.
Before turning on the unit, connect all grounding terminals and
extension cords to a protective ground via a ground socket. Any
interruption of the protective grounding is a potential shock
hazard and may cause personal injury. Whenever the ground
protection is impaired, do not use the unit and secure it against
any accidental operation.
Do not tamper with the protective ground terminal.
To Next Page
Loading...
