Getting Started with Your Unit
40 FTB-500
Accessing and Exiting ToolBox
Accessing and Exiting ToolBox
By default, ToolBox is displayed automatically when you turn on the unit.
However, you can configure your unit to send ToolBox to the notification
area (see Setting ToolBox Behavior on page 105). This could be useful, for
example, if you prefer to start working in Windows. You can also configure
your unit to start any of the available applications as soon as ToolBox is
started (see Selecting the Startup Applications on page 79).
To acce s s To o l Box from the Windows environment:
Tap the icon on your desktop.
Note: If ToolBox has been sent to the notification area, from this location,
right-click the icon, and then select Restore ToolBox.
To exit Too l B o x :
Tap .
To Next Page
Loading...
