MLC 62 Series • Software Setup
Software Setup, cont’d
3-12
3. After 3 seconds, the Reset LED blinks once. Release the
button, then immediately (within 1 second) press it again
briefly. The reset starts.
When the reset is finished, the Reset LED blinks four times,
indicating that the reset was successful.
Accessing the Help File
The MLC 62 configuration software help file contains detailed
descriptions of all procedures required for configuring the MLC
and using it to control devices.
To open the help file, select Help file from the Help menu on
the configuration software's main window. In this file, you can
perform a search or use the table of contents to locate the topic
or procedure you want.
To Next Page
Loading...
