Contents | 3
Safety and Precautions
<Attention when installing the receiver>
Install on an even plane.
Don
˅
t install in the cold or under direct sunlight.
Leave a minimum 10cm gap all around the product.
Don
˅
t disassemble, repair, or reorganize the product.
<Use and care of the receiver >
Place the product in a well-ventilated area.
Place the product where dust and other materials do not build up.
Don
˅
t plug in with several other power plugs.
Don
˅
t place the product where there are extreme vibrations or near magnetic forces.
Don
˅
t place objects on top of the product.
Don
˅
t place cups that hold water or other liquids on top of the product.
To Next Page
Loading...