Faraday MPC-6000 - User Level; Activating a General Alarm; Activating an Alert; Activating a Drill

MPC-6000 / MPC-7000 / RND-2 PROGRAMMING MANUAL
14
User Level
Pressing the menu button displays the User Level functions. The user menu allows the
operator to activate General Alarm, Alert, Drill, Recall or Lamp Test. It also allows for
viewing the Event History. The Maintenance Level programming and Tech Level
programming can be accessed from the User menu as well.
Following are the various functions that may be performed at the User level.
Activating a General Alarm
It is possible to sound a general alarm from the keypad using the following steps:
Action Result
1. Press “Menu”.
2. Press “General Alarm”. Display requests “Yes/No” confirmation of the
General Alarm.
3. Press “Yes” to activate a General Alarm. The display will return to normal indicating
General Alarm has been activated.
4. Press “System Reset” or “Alarm Silence” to stop.
NOTE: System Reset is required if audibles are non-silenceable.
Activating an Alert
It is possible to sound an Alert from the keypad using the following steps:
Action Result
1. Press “Menu”.
2. Press “Alert”. Display requests “Yes/No” confirmation of the
Alert.
3. Press “Yes” to activate an Alert. The display will return to normal indicating an
Alert has been activated.
4. Press “System Reset” to stop.
Activating a Drill
It is possible to sound a drill from the keypad using the following steps:
Action Result
1. Press “Menu”.
2. Press “More”.
3. Press “Drill”. Display requests “Yes/No” confirmation of the
Drill.
4. Press “Yes” to activate a Drill. The display will indicate Drill has been
activated.
5. Press “System Reset” to stop. Returns to system normal display.