MPC-6000 / MPC-7000 / RND-2 PROGRAMMING MANUAL
4
Interface for the Technician Level
When the Technician Level is accessed using the password, the LCD display and the
keypad are used to program the panel, and to view the programming if desired. The
display acts as a menu and the keypad allows the user to navigate through the menu of
functions and change or print the programming. The following figure describes the
navigation used in this context:
A-esc: will backup to previous screen
B-fn1: will perform function 1
C-fn2: will perform function 2
D-Nxt: will step to the next screen
Each menu item is associated with "A", "B", "C", or "D" buttons on the keypad. Pressing
one of these keys will cause the panel to go to the function associated with the button.
For example
A-Esc, will backup to previous screen
B-+20 Jumps ahead 20 devices
C-mor shows further options in list
D-+1, Jumps ahead 1
Aesc
Bfn1
Cfn2
Dnxt
ZNxxx P Aesc
ZoneType:PRESIG B+20
Timer:___ Sec Cmor
To Zone #:___ D +1
To Next Page
Loading...
