Faraday MPC-6000 - Circuit Specifications (NAC, Serial, X1)

MPC-6000 / MPC-7000 / RND-2 PROGRAMMING MANUAL
21
Setting the Time Format
The time and the time format are adjustable.
Action Result
1. Press “More”.
2. Press “More”.
3. Press “More”.
4. Press “Time/Date”.
5. Press “Time”.
6. Press “Set Time Format”. The display will show the current time format.
7. Use the “12 hour”, “24 hour” buttons to set the
time format.
Enabling Daylight Savings Time Adjustment
The MPC-6000/MPC-7000/RND-2 can adjust for daylight savings automatically. Follow
the steps below to enable or disable the automatic daylight savings adjustment feature:
Action Result
1. Press “More”.
2. Press “More”.
3. Press “More”.
4. Press “Time/Date”.
5. Press “Time”.
6. Press “DST Adjust”. The display will show whether the DST
automatic adjustment is enabled or disabled.
7. Use the “Disable(Enable)” button to change the
status.
The state will toggle on the display.
Setting the Date
The date and the date format are adjustable.
Action Result
1. Press “More”.
2. Press “More”.
3. Press “More”.
4. Press “Time/Date”.
5. Press “Date”.
6. Press “Set Date”. The display will show the current date.
7. Use the keypad to enter new date. Pressing “Clr”
will clear the entry. Pressing “Set” will set the date.