MPC-6000/MPC-7000/RND-2 PROGRAMMING MANUAL
47
APPENDIX D: TYPICAL PROGRAMMING MODEL
One Hazard (Releasing Zone) Area and One Fire (Building Fire Protection) Area
Input Devices
Manual Release Switch
Abort Switch
Releasing Input
Group 1
Output Zone 1
Output Zone 2
Input Devices
Manual Pull Stations
General Alarm
Group
NAC1
1st Alarm/
Pre-Discharge
NAC2
Discharge
NAC3
Alarm
NAC4
Alarm or
Trouble
Coded or
Steady Only
Steady-On or
Strobe Only
Steady-On or
Strobe Only
Steady-On or
Strobe Only
NOTE: The General Alarm Input Group must have an audible NAC Association.
Any Alarm condition from
the releasing input group
will annunciate a general
alarm condition
To Next Page
Loading...
