MPC-6000 / MPC-7000 / RND-2 PROGRAMMING MANUAL
2
Maintenance Level
The Maintenance Level is accessed via the User Menu and the correct password. The
functions accessible in the Maintenance Level are as follows:
•
Enable or disable devices, outputs, groups, zones, status relays and option modules
•
Configure and run a Quick Test
•
Print History (For Diagnostics Only)
•
Print Detector Levels (For Diagnostics Only)
•
Edit Device and system labels
•
Set the system time and date
•
Change the Maintenance Level access password
•
Program a device
•
Clear event history
•
Enable or disable application
Technician Level
The Technician Level is accessed via the User Menu and entering the correct
password. The functions accessible in the Technician Level are as follows:
•
Configure devices, outputs, groups, zones and option modules
•
Set System parameters (i.e., automatic silence, alarm silence inhibit, reset inhibit, etc.)
•
Configure MPCnet network options
•
Configure bell codes
•
Validate the backup configuration
•
Swap the primary and backup configuration
•
Copy the primary to the backup configuration
•
Print the primary and backup configuration (For Diagnostics Only)
•
Change the Technician Level access password
To Next Page
