Faraday MPC-6000 - X1 Addressable Devices; Device Types and Programming

MPC-6000 / MPC-7000 / RND-2 PROGRAMMING MANUAL
16
Accessing Maintenance Functions
There are other functions available after the maintenance password has been entered.
Follow the steps below to access the maintenance functions:
Action Result
1. Press “Menu”.
2. Press “More”.
3. Press “More.”
4. Press “More”.
5. Press “Maint. Level”. The display will show the screen to enter the
four-digit maintenance password.
6. Enter the four-digit password (default is 0 1 2 3)
and press “Enter”.
Accessing Technician Functions
There are other functions available after the technician password has been entered.
Follow the steps below to access the technician functions:
Action Result
1. Press “Menu”.
2. Press “More”.
3. Press “More”.
4. Press “More”.
5. Press “Tech. Level”. The display will show the screen to enter the
six-digit technician password.
6. Enter the six-digit password (default is 0 1 2 3 4 5)
and press “Enter”.