MPC-6000 / MPC-7000 / RND-2 PROGRAMMING MANUAL
22
Setting the Date Format
The date and the date format are adjustable.
Action Result
1. Press “More”.
2. Press “More”.
3. Press “More”.
4. Press “Time/Date”.
5. Press “Date”.
6. Press “Set Date Format”. The display will show the current date format.
7. Use the two date format buttons to select the
desired date format.
Clearing the History
The panel can store the last 2000 events in the event history. The information displayed
includes the date and time, the type of event (TRB, ALM, SUP, etc.), the device
reporting the event and the event reported. This event history may be cleared using the
following steps.
Action Result
1. Press “More”.
2. Press “More”.
3. Press “More”.
4. Press “Clear History”. The display will then request a “yes” or “no”
confirmation.
5. Press “Yes” to clear the event history. The display will flash a short message to
indicate the history has been cleared.
Printing the History (For Diagnostics Test Only)
The panel can store the last 2000 events in the event history. The information displayed
includes the date and time, the type of event (TRB, ALM, SUP, etc.), the device
reporting the event and the event reported. This event history may be printed using the
following steps.
Action Result
1. Press “More”.
2. Press “Print Hist”. The display will show the “Print Fwd” and “Print
Reverse” options.
3. Select the direction of printing that is desired. The display will show a message that history is
being printed.
To Next Page
Loading...
