96
(MT12 - Gb2004)
I
NTERCOMS *
V
IDEOINTERCOMS *
T
ELECOMMUNICATION
coax
Si 311O/1
ONE-WAY VIDEO INTERCOM SYSTEM CONNECTED TO ONE EXTERNAL DOOR STATION.
Q.ty Article Description
1 PT 5160 + WB 5100 Videointercom FLAT + wall bracket
PT 5660 + WB 5600 + 1283 Videointercom + wall bracket + back box
PT 5860 + WB 5600 Videointercom reflex + wall bracket
PV 1260 + WB1200 + 1283 Videointercom + wall bracket + back box
PV 2160 + WB 2100 Videointercom FLAT + wall bracket
1 1281 Power supply
1 1382 Timer
1 PA ** Door release button (optional)
1 SE ** Electric door lock (12Vac-1A)
Mody series external door station
1 MD72 Back box and module frames
1 MD11 Module for electric door speaker
1 MD82 Hood cover
1 MD92* Rain shelter
1 MD30 Electric door speaker (amplifier)
1 MD41 Camera
Matrix series external door station
1 MA71 Back box and module frames
1 MA61 Front frame
1 MA43 Camera module with integrated audio and call button
* The rain shelter is used in the place of the back box and hood cover.
** Articles not supplied by ACI Farfisa.
Working instructions. See page 94.
Notes
- If the control switching ON is necessary, connect terminal 4 of the timer (dashed wire).
- For the connection of name plate lamps read notes 6 and 7 of the installation instructions on page
91.
- For wires dimensioning refer to the installation instructions and table on page 92.
ONE-WAY VIDEO INTERCOM CONNECTION WITH MULTI-CORE CABLE art. 1304
1304. MULTI-CORE CABLE
Video intercom cable with 10 wires of differ-
ent cross-sections and 75Ω coaxial cable. It
can be used in systems with a maximum
distance of 100 meters (50m between timer
and camera unit and 50m between timer and
video intercom).
Wire characteristics
Colour Cross-section (mm²)
Red 1
Yellow 0.5
Blue 0.5
Black 0.35
Green 0.35
Orange 0.35
White 0.25
Pink 0.25
Light blue 0.25
Grey 0.25
75Ω low loss coaxial cable.
art.1304
art.1304
To Next Page
Loading...
