FCI ST100 series User Manual

APPENDIX C - ADDITIONAL INFORMATION ST100 Series Flow Meter
80 Fluid Components International LLC
– Get from Device (button)
– Send to Device (button)
■ SDCardLogFiles(frame)
– Show List of Log Files (button)
– List of Log Files (Log File Name, Size) (list box)
– Upload Selected Log File(s) (button)
▬ Totalizer
■ Totalizer(frame)
– Totalizer enabled/disabled (check box)
– Show/Hide Totalizer Value (check box)
– Reset Totalizer to Zero (button)
■ GetfromDevice(button)
■ SendtoDevice(button)
▬ PressureOffset
■ Pressure(frame)
– Zero (button)
– Offset (text box)
– Apply Offset (button)
■ GetfromDevice(button)
● aDvanceDsetuP
▬ UserParameters
■ CustomerMin/Max(frame)
– Cust. Min/Max Flow (text box, customer units)
– Cust. Min/Max Temperature (text box, customer units)
– Cust. Min/Max Pressure (text box, customer units)
■ KFactor(frame)
– K Factor 1 (text box)
– K Factor 2 (text box)
– K Factor 3 (text box)
– K Factor 4 (text box)
■ Miscellaneous(frame)
– Density (text box)
– Flow Damping (text box)
■ GetfromDevice(button)
■ SendtoDevice(button)
▬ Ethernet
■ EthernetSettings(frame)
– Unit IP Address
– Gateway Address
– Subnet Mask
■ GetfromDevice(button)
■ SendtoDevice(button)
▬ DateandTime
■ DateandTime(frame)
– Date (calendar date picker)
– Time (spinner)
■ GetfromDevice(button)
■ SendtoDevice(button)
▬ DownloadCalibration
■ GetCalibrationFile(frame)
– File name path (text box & “Browse” button)
■ SelectGroupForDownload(frame)
– Group (drop-down list)
■ SelectFEForDownload(frame)
– FE (drop-down list)
■ SendtoDevice(button)
● configuration
▬ Output
■ AnalogOutputBoard.(4-20mA,Freq.,Pulse&
HART)(radiobutton)
– Analog Output Selection (frame)
○ 4-20mA#1:(drop-downlist)
◊ 4mA@Units≤(textbox)
◊ 20mA@Units≥(textbox)
○ 4-20mA#2:(drop-downlist)
◊ 4mA@Units≤(textbox)
◊ 20mA@Units≥(textbox)
○ 4-20mA#3:(drop-downlist)
◊ 4mA@Units≤(textbox)
◊ 20mA@Units≥(textbox)
○ Frequency(drop-downlist)
◊ Range:(drop-downlist)
○ Pulse:(drop-downlist)
◊ X(multiplier):(drop-downlist)
■ DigitalOutputBoard(Modbus,FoundationFieldbus
&Probus)(radiobutton)
– Digital Output Selection (frame)
○ DigitalBus(drop-downlist)
■ GetfromDevice(button)
■ SendtoDevice(button)
▬ 4-20mAUser
■ 4-20mA#1
– Manual mA Output (text box)
– Click to Output Manual (button)
– NAMUR Enabled (check box)
○ SetNAMUR@3.6mA(button)
○ SetNAMUR@21.0mA(button)
○ NAMURmA(textbox)
○ NAMURcounts(textbox)
○ ClicktoTestNAMUR(button)
■ 4-20mA#2
– Manual mA Output (text box)
■ 4-20mA#3
– Manual mA Output (text box)
– Click to Output Manual (button)
■ GetfromDevice(button)

FCI ST100 series Specifications

General

Brand	FCI
Model	ST100 series
Category	Measuring Instruments
Language	English