21
© Ferno s.r.l. Rel.05042024
XT Series Extrication Devices
2. Both operators: position the groin restraints (black
and green) arranging them under the patient's legs,
fastening them on the same side following the colour
code (Figures 21A and 21B) and adjusting the tension
appropriately to secure the patient to the extrication
device.
1. Operator 2: positions the chest restraints (yellow and red) in crossed conguration (Figures 20A, 20B, 20C) and for
each one of them fastens the upper section to the lower one on the opposite site with the buckles provided. If necessary,
operator suitably adjusts the tension of the restraints. In this phase, the operators must ensure that the red lifting and
carrying handles remain free, in order to nd and seize them easily during the nal extrication phase.
Figure 19 - Triangular head immobiliser positioning
Figure 20 - Application of chest restraints (yellow and red)
Figure 21 - Application of groin restraints
3. Operator 1: once all restraints have been applied
and fastened, operator 1 takes the chin strap from its
bag, adjusts its length and gives the opposite end to
operator 2 (Figure 21).
19A 19B
19C
20A 20B
20C
21A
21B
To Next Page
Loading...
