22
© Ferno s.r.l. Rel.05042024
XT Series Extrication Devices
Figure 23 - Extrication with the carrying handles
Figure 24 - Positioning on backboard
4. Operator 2: threads the opposite end of the chin strap through the 3rd hole of the extrication device, fastens the strap by
means of the Velcro fastener and adjusts it to the end where the bag is placed, so as to nish the procedure for restraining
and stabilising the cervical spine (Figures 22A, 22B, 22C, 22D).
5. Before proceeding to extricate the patient, both operators must make sure that they have applied and adjusted all
fastening systems correctly.
6. Both operators: work together to identify the best way out, the safe and correct procedures for themselves and the patient
according to the circumstances. Then, using the red lifting and carrying handles, they extricate the patient (Figure 23),
appropriately positioning the patient on the chosen device (Figure 24).
Figure 22 - Cervical spine nal fastening with chin strap
22A 22B 22C 22D
To Next Page
Loading...
