Festo 03 - Page 106

Possible entries:
• Profile Number
The Festo valve terminal complies with the
INTERBUS I/O profile 12
H
. Enter this value in
the box "Profile number. "
• Interface Type
The default entry "Interface Universal” can be
transferred. Alternatively you can select the
types
Remote bus or Installation remote bus .
• Icon
Open the dialogue window "Icon ...,”, if you
wish to use specific icons for the Festo valve
terminal.
PLEASE NOTE
The specific icons for the Festo valve termi-
nals can be found on the accompanying CD-
ROM.
• If necessary, read the file "Readme.txt" on
the CD-ROM, in order to obtain a brief
summary of the contents of the CD-ROM.
• Copy the file "Festo.ICL" into the CMD
directory \PICTURE\.
VIFB6 - 03/05 4. Commissioning
9809c 4-21