Festo Controller CECC-D - Page 78

Festo Controller CECC
74
Feature CECC
Ethernet
– Connector plug RJ45
– Number 1
– Data transmission speed 10/100 Mbit/s
– Supported protocols TCP/IP, EasyIP, Modbus TCP
Programming software CODESYS provided by Festo (pbF)
Programming language To IEC 61131-3
SFC, IL, FCH, LDR, ST
CE symbol (see declaration of
conformity)
To EU EMC Directive
1),2)
1) The device is intended for use in industrial areas. Interference suppression measures may be required
in residential areas.
2) The device is categorised in Zone A to EN 61131-2:2007.
Table: Technical data