Festo CPX-FB13 - B.1.7 Bus Parameters;Reaction Times

B. General DP master
B−16
Festo P.BE−CPX−FB13−EN en 0811c
B.1.7 Bus parameters/reaction times
Baud rate
(kBaud)
max T
SDR
(T
Bit
) min T
SDR
(T
Bit
)
.. 187.5 60
500 100
1500 150
11
3000 250
11
6000 450
12000 800
Tab.B/9: Bus parameters and reaction times
B.1.8 Transmission times on the PROFIBUS−DP
Note
Observe here the cycle time of your PLC and the update
time of the PROFIBUS−DP.
The delay time within the CPX terminal is very brief. It is con
siderably less than 1 ms, irrespective of the equipment fitted
on your CPX terminal.
Please refer to the manual for your controller for ascertaining
the
total time required for transmission.