Festo CPX-FB13 - B.1.3 Check the Configuration Data

B. General DP master
B−7
Festo P.BE−CPX−FB13−EN en 0811c
B.1.3 Check the configuration data
Chk_Cfg The configuration data are transferred to the CPX terminal
by the DP master with the function Chk_Cfg.
Permitted identifiers for the CPX terminal:
Identifiers according to EN 50170 and the assigned address
space of the CPX modules can be found in the tables
in
section 2.1.2:
 Field bus nodes and diagnosis mode: Tab.2/1
 Digital input and output modules: Tab.2/2
 Analogue input and output modules: Tab.2/3
 Technology modules Tab.2/4
 CPX−FB13 as remote controller Tab.2/5
MPA pneumatics Tab.2/6
MPA pneumatic module with diagnosis function D2:
Tab.2/7
 Pneumatic interfaces and other pneumatics:
Tab.2/8 and Tab.2/9