Festo CPX-FB13 - Page 61

2. Commissioning
2−21
Festo P.BE−CPX−FB13−EN en 0811c
Publication
date
Support from
December
2008
Identification and maintenance (see section 2.1.6)
July 2008  Soft−stop end−position controller CPX−CMPX−...
 Multi−axis interface CPX−CMXX
May 2008 Pressure sensor VMPA−FB−PS−... and parameters of
analogue process value presentation
(see section 2.2.4)
April 2007 Analogue input module CPX−4AE−TC
March 2007 Proportional pressure regulator valve VPPM−6TA−...
December
2006
 Digital output module CPX−8DA−H
 Digital input module CPX−M−16DE−D
July 2006 MPA1 and MPA2 electronic modules with
diagnosis functionD2
 Digital input module CPX−16DE and CPX−8DE−N
Tab.2/14: History of the GSDs
Note
GSDs are downward compatible. Always use the latest
GSD to ensure support of all functions of the CPX−FB13.
For some functions, the latest update of the CPX−FB13 is
required. You can find information on this in the correspon
ding sections of this manual.